Phoenix, AZ
Ph:(602) 495-0048
Fax:(602) 261-7726
Ontario, CA
Ph:(909) 467-2016
Fax:(909) 988-3978
San Diego, CA
Ph: (858) 278-4184
Antioch, CA 
Ph:(510) 233-3221 Fax:(909) 988-3978
Las Vegas, NV
Ph:(702) 877-3013
Fax:(877) 253-9078
Salt Lake City, UT
Ph:(801) 322-1016
Fax:(877) 253-9078
Albuquerque, NM
Ph:(505) 242-0065
Fax:(877) 253-9078
Metal Car Ports
RV Awnings

Western Rib Panel

Color Charts

FAQ

RV Awning
10 Post Metal RV Awning Kit

Best Priced Metal
RV Awning
$ 1,850   Zincalume Roof
Panels & Trim ( As Shown )
$ 2,200 Painted Roofing & Trim
Base Plates ( If Needed )
10 @ $ 60 = $ 600

Western Rib Metal Roofing Panel
Heavy 26 Gauge Panels
 

Heavier Gauge Steel
Than The Competition.

24 Gauge Roofing
4" X 4", 14 Gauge, Galvanized Post
14 GA. Purlins, 10" Deep

10 Post Metal
RV Awning Kit

- 15'-2" W  X  36' D  X  15' H
( 14' Clearance )
- All Galvanized and Zincalume Material
- 90 MPH Wind Load
- 40# Snow Load

Easy Installation. Do It Yourself Kits At A Great Price.
Designed To Be Constructed By One Or Two People With Minimal Building Experience.


Metal RV Awnings Can Be Picked By Customer At The Following Locations:
Must Have A Truck Or Trailer Capable Of Hauling 18' Long Panels

Western States Decking, Inc.                    Western Metal Deck
901 W. Watkins St.                                  616 S. Oaks Ave.
Phoenix, AZ 85007                                   Ontario, CA 91762
( 602 ) 495-0048                                       ( 909 ) 467-2016

Metal RV Awning Kits Can Be Delivered Inexpensively. There Must Be A Forklift Or Two People Available To Hand Off Load Carport Kit. The Truck Does Not Come With A Forklift And The Driver Is Not Allowed To Off Load. Delivery Site Must Be Capable Of Accepting A 48’ Flat Bed Truck. The Entire Kit Weighs Appx. 1,000 Pounds. However No Individual Component Weighs More Than 75 #. Unloads Quickly.


Can Be Delivered Anywhere - E mail ( Stacy@metaldeck.com ) With Zip Code Of Ship To Destination For A Freight Rate.

METAL RV AWNING KIT

6 POST METAL RV AWNING


Western States Decking’s Single Slope RV Awning represents the best RV Awning value in anywhere. This metal carport is strong - it has a 40 lb. snow load capability and can withstand 90MPH winds.  It is perfect for large covers such as equipment protection, apartment/condominium carports, storage covers, small boat cover, etc.

It is designed for the do-it-yourselfer. This RV Awning kit is easy to install and is designed to be constructed by one or two people with minimal building experience.

WE ENCOURAGE YOU TO SHOP THE COMPETITION !
OUR COMPETITORS PRICING RANGES FROM  $ 3,000 to OVER $ 4,000
OUR PRICE IS $ 2,000 FOR GALVANIZED AND $ 2,500 FOR A PAINTED METAL CAR PORT KIT


In addition, we use heavier steel than other carport companies.
The Roofing Panel is a strong 26 gauge.
The Post are 14 Gauge, 4” X 4”
The Purlins are 14 Gauge, 10” X 2 ½”

Copies of engineered plans are available for free online.  Original engineered stamped plans are available upon request. 
1 Set of Stamped Engineered Plans is $100.00
3 Sets of Stamped Engineered Plans is $150.00
Stamped plans are available for Arizona, California, Nevada, New Mexico and Utah.

Delivery Available For RV Awnings
RV Awnings Arizona, AZ
RV Awnings California , CA
RV Awnings Nevada, NV
RV Awnings Utah, UT
RV Awnings New Mexico, NM